CUREE Banner

Publications

SAC Background Documents available through ATC

The SAC Background Document series has been developed to disseminate information related to the mission of the Steel Project that has not been reviewed as part of the formal report series. The Background Documents are not intended to be used for design or for any specific building project and do not necessarily represent official findings or recommendations of FEMA, the SAC Joint Venture and its organizations, or any other project participants.

To order these documents, please contact: Applied Technology Council, 555 Twin Dolphin Drive, Suite 550, Redwood City, California 94065, (650) 595-1542; FAX (650) 593-2320.

SAC/BD-00/01 Parametric Tests on Unreinforced Connections, Volume I - Final Report, by K.-H. Lee, B. Stojadinovic, S. C. Goel, A. G. Margarian, J. Choi, A. Wongkaew, B. P. Reyher, and D.-Y, Lee
SAC/BD-00/01A Parametric Tests on Unreinforced Connections, Volume II - Appendices, by K.-H. Lee, B. Stojadinovic, S. C. Goel, A. G. Margarian, J. Choi, A. Wongkaew, B. P. Reyher, and D.-Y, Lee
SAC/BD-00/02 Parametric Tests on the Free Flange Connections, by J. Choi, B. Stojadinovic, and S. C. Goel
SAC/BD-00/03 Cyclic Tests on Simple Connections Including Effects of the Slab, by J. Liu and A. Astaneh-Asl
SAC/BD-00/04 Tests on Bolted Connections, Part I: Technical Report, by J. Swanson, R. Leon, and J. Smallridge
SAC/BD-00/04A Tests on Bolted Connections, Part II: Appendices, by J. Swanson, R. Leon, and J. Smallridge
SAC/BD-00/05 Bolted Flange Plate Connections, by S. P. Schneider and I. Teeraparbwong
SAC/BD-00/06 Round Robin Testing of Ultrasonic Testing Technicians, by R. E. Shaw, Jr.
SAC/BD-00/07 Dynamic Tension Tests of Simulated Welded Beam Flange Connections, by J. M. Ricles, C. Mao, E. J. Kaufmann, L.-W. Lu, and J. W. Fisher
SAC/BD-00/08 Design of Steel Moment Frame Model Buildings in Los Angeles, Seattle and Boston, by P. Clark
SAC/BD-00/09 Benchmarking of Analysis Programs for SMRF System Performance Studies, by A. Gupta and H. Krawinkler
SAC/BD-00/10 Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies, by H. Krawinkler, A. Gupta, R. Medina, and N. Luco
SAC/BD-00/11 Development of Improved Post-Earthquake Inspection Procedures for Steel Moment Frame Buildings, by P. Clark
SAC/BD-00/12 Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal Used in the Construction of Seismic Moment Frames, by M. Q. Johnson
SAC/BD-00/13 Preliminary Evaluation of Heat Affected Zone Toughness in Structural Shapes Used in the Construction of Seismic Moment Frames, by M. Q. Johnson and J. E. Ramirez
SAC/BD-00/14 Evaluation of Mechanical Properties in Full-Scale Connections and Recommended Minimum Weld Toughness for Moment Resisting Frames, by M. Q. Johnson, W. Mohr, and J. Barsom
SAC/BD-00/15 Simplified Design Models for Predicting the Seismic Performance of Steel Moment Frame Connections, by C. Roeder, R. G. Coons, and M. Hoit
SAC/BD-00/16 SAC Phase 2 Test Plan, by C. Roeder
SAC/BD-00/17 Behavior and Design of Radius-Cut, Reduced Beam Section Connections, by M. Engelhardt, G. Fry, S. Jones, M. Venti, and S. Holliday
SAC/BD-00/18 Test of a Free Flange Connection with a Composite Floor Slab, by M. Venti and M. Engelhardt
SAC/BD-00/19 Cyclic Testing of a Free Flange Moment Connection, by C. Gilton, B. Chi, and C.-M. Uang
SAC/BD-00/20 Improvement of Welded Connections Using Fracture Tough Overlays, by James Anderson, J. Duan, P. Maranian, and Y. Xiao
SAC/BD-00/21 Cyclic Testing of Bolted Moment End-Plate Connections, by T. Murray, E. Sumner, and T. Mays
SAC/BD-00/22 Cyclic Response of RBS Moment Connections: Loading Sequence and Lateral Bracing Effects, by Q. S. Yu, C. Gilton, and C. M. Uang
SAC/BD-00/23 Cyclic Response of RBS Moment Connections: Weak Axis Configuration and Deep Column Effects, by C. Gilton, B. Chi, and C. M. Uang
SAC/BD-00/24 Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connections, by J. M. Ricles, C. Mao, L.-W. Lu, and J. Fisher
SAC/BD-00/25 Performance Prediction and Evaluation of Steel Special Moment Frames for Seismic Loads, by K. Lee and D. A. Foutch
SAC/BD-00/26 Performance Prediction and Evaluation of Low Ductility Steel Moment Frames for Seismic Loads, by S. Yun and D. A. Foutch
SAC/BD-00/27 Steel Moment Resisting Connections Reinforced with Cover and Flange Plates, by T. Kim, A. S. Whittaker, V. V. Bertero, A. S. J. Gilani, and S. M. Takhirov
SAC/BD-00/28 Failure of a Column K-Area Fracture, by J. M. Barsom and J. V. Pellegrino
SAC/BD-00/29 Inspection Technology Workshop, by R. E. Shaw, Jr.
SAC/BD-00/30 Preliminary Assessment of the Impact of the Northridge Earthquake on Construction Costs of Steel Moment Frame Buildings, by Davis Langdon Adamson

1 | 2 | 3

CUREE Publishing
Frequently Asked Questions
SAC Steel Publications

Archives
CUREE Newsletters
CUREE Calendars

Downloads
CUREE Style Guide
Style Guide Template

© 2000-2009 CUREE. All rights reserved.
Consortium of Universities for Research in Earthquake Engineering
last update 11.24.08