Microjig Gripper Alternative

1,468 Reviews Scanned

In order to provide you with accurate and valuable pieces of information and reviews, we have conducted in-depth research for the best microjig gripper alternative of 2023. In addition, you will find our top picks and highest-reviewed products in the section below.
# Preview Product Rating
1 MICRO JIG - GRR-RIPPER GR2-GO Grr-Ripper2 Go Pushblock, 2-Pack MICRO JIG - GRR-RIPPER GR2-GO Grr-Ripper2 Go Pushblock, 2-Pack
2 MICROJIG GRR-RIPPER GR2-GO Grr-Ripper2 Go Pushblock MICROJIG GRR-RIPPER GR2-GO Grr-Ripper2 Go Pushblock
3 MICROJIG GRR-RIPPER GR-281 Complete 3D Pushblock System, Yellow MICROJIG GRR-RIPPER GR-281 Complete 3D Pushblock System, Yellow
4 MICROJIG GRR-RIPPER GRAK-404 Upgrade Kit For Gr-100 Pushblock, Yellow MICROJIG GRR-RIPPER GRAK-404 Upgrade Kit For Gr-100 Pushblock, Yellow
5 MICRO JIG - GRGH-040 GRR-RIPPER Gravity Heel Kit MICRO JIG - GRGH-040 GRR-RIPPER Gravity Heel Kit
6 MICROJIG GRR-RIPPER GRP-5 1/4' Replacement Leg, Yellow MICROJIG GRR-RIPPER GRP-5 1/4" Replacement Leg, Yellow
7 Microjig Matchfit DVC-700RAP Dovetail Rachet Clamp Ap Microjig Matchfit DVC-700RAP Dovetail Rachet Clamp Ap No ratings yet
8 MICROJIG GRR-RIPPER GR-HB-010 Handle Bridge Kit, Accessory Only, Yellow MICROJIG GRR-RIPPER GR-HB-010 Handle Bridge Kit, Accessory Only, Yellow
9 MICRO JIG - GRP-3Y Micro Jig Yellow Replacement Center Leg For GRR-Ripper MICRO JIG - GRP-3Y Micro Jig Yellow Replacement Center Leg For GRR-Ripper No ratings yet
10 MICROJIG GRR-RIPPER GRP-11G 1/8' Leg Table Saw Accessory, Green MICROJIG GRR-RIPPER GRP-11G 1/8" Leg Table Saw Accessory, Green
11 MICROJIG GRR-RIPPER RR-303 3-Piece Replacement Leg Set, Yellow MICROJIG GRR-RIPPER RR-303 3-Piece Replacement Leg Set, Yellow
12 MICROJIG GRR-RIPPER GR-200+GRP-11G Gripper Tm 200 Advanced System With 1/8 Leg, Green MICROJIG GRR-RIPPER GR-200+GRP-11G Gripper Tm 200 Advanced System With 1/8 Leg, Green
13 MICROJIG GRR-RIPPER GR-200 Gripper Tm 200 Advanced System With 1/8 Leg, Green MICROJIG GRR-RIPPER GR-200 Gripper Tm 200 Advanced System With 1/8 Leg, Green No ratings yet
14 MICRO JIG - GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws MICRO JIG - GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws
15 MICROJIG GRR-RIPPER GR-200 Advanced 3D Pushblock, Yellow MICROJIG GRR-RIPPER GR-200 Advanced 3D Pushblock, Yellow
16 MICRO JIG ZP750-S1 Zeroplay Miter Stop (New, Upgraded), Green, 9.5' x 0.3125' x 0.78' MICRO JIG ZP750-S1 Zeroplay Miter Stop (New, Upgraded), Green, 9.5" x 0.3125" x 0.78" No ratings yet
17 MICROJIG GRR-RIPPER GR-200 Advanced Adjustable Table Saw Pushblock, Yellow MICROJIG GRR-RIPPER GR-200 Advanced Adjustable Table Saw Pushblock, Yellow
18 MICRO JIG - GRR-RIPPER GRGH-040 Gravity Heel Kit Newest Version, Yellow MICRO JIG - GRR-RIPPER GRGH-040 Gravity Heel Kit Newest Version, Yellow
19 MICROJIG GRR-RIPPER GR-200 Advanced Adjustable Table Saw Pushblock, 2-Pack, Yellow MICROJIG GRR-RIPPER GR-200 Advanced Adjustable Table Saw Pushblock, 2-Pack, Yellow No ratings yet
20 GRR-RIPPER 1/2' Leg Replacement by MICROJIG. Fits any existing GRR-RIPPER GRR-RIPPER 1/2" Leg Replacement by MICROJIG. Fits any existing GRR-RIPPER

Bestseller No. 1
MICRO JIG - GRR-RIPPER GR2-GO Grr-Ripper2 Go Pushblock, 2-Pack
  • Multipurpose Push Block: The MicroJig Grr-ripper2 Go Push Block is a must-have for any table saw. It prevents kickbacks and injuries in a job site and...
  • Kickback Prevention: The Grr-ripper2 Go Push Block's kickback prevention feature helps reduce the risk of accidents and injuries while you work. Its...
  • No Assembly: It needs no assembly and allows easy setup. To use the fence scale sticker, simply see the color over your cutting width and match the...
  • Accurate Results: The Grr-ripper2 Go lets you cut small parts safely and accurately. The leg's minimum cutting width is 5/16 inch. That makes it...
  • Versatile: The Grr-ripper2 Go can be used all over the job site and home shop. Keeping digits safely away from bits and blades on the table saw router...
Bestseller No. 2
MICROJIG GRR-RIPPER GR2-GO Grr-Ripper2 Go Pushblock
  • Introducing the Grr-ripper2 Go from Microjig! This innovative tool protects your hands and fingers from cuts and injuries while working with the table...
  • With its kickback prevention feature, you can reduce the risk of accidents while working.
  • The extreme grip ensures that you can easily hold and control your workpiece, preventing slippage and accidental injuries.
  • The precision legs have a minimum cutting width of 5/16" (8mm), making it perfect for making precise, thin cuts.
  • With no bare-hand feeding and keeping the material tight along the fence will prevent kickback and provide superior protection.
Bestseller No. 3
MICROJIG GRR-RIPPER GR-281 Complete 3D Pushblock System, Yellow
  • Protect hands and prevent kickback like never before
  • Rip as thin as 1/8" For extreme precision
  • Powerful grip and smart gravity heel for ultimate traction
  • Fully adjustable and incredible control over many materials
  • The complete system for table saw and work shop safety, precision, and control
SaleBestseller No. 4
MICROJIG GRR-RIPPER GRAK-404 Upgrade Kit For Gr-100 Pushblock, Yellow
  • The safest, most precise pushblock
  • This kit includes
  • Stabilizing Plate
  • Adjustable Spacer
  • Mounting Hardware
Bestseller No. 5
MICRO JIG - GRGH-040 GRR-RIPPER Gravity Heel Kit
  • GRR-RIPPER Gravity Heel Accessory is a fully adjustable heel with auto-retracting technology for reducing blowout.
  • ROUTER TABLE Gravity Heels provide a secure backing to routing operations to prevent blow out. It can also be used as a template for repeat routing.
  • The Gravity Heels are exceptional with long stock; they grab the tail end of your board and automatically retract mid-board.
  • BANDSAW Smoother, safer andmore controlled cuts on the bandsaw will be second nature with the adjustability of the Gravity Heel.
  • TABLE SAW Virtually eliminate tear out and increase control and stability when feeding long or short stock.
SaleBestseller No. 6
MICROJIG GRR-RIPPER GRP-5 1/4" Replacement Leg, Yellow
  • 1/4" Replacement Leg for your GRR-RIPPER
  • Fits any and all existing GRR-RIPPER models
  • Perfect for when you accidentally cut into and trim your GRR-RIPPER legs
  • Cutting into the GRR-RIPPER is better than cutting into your hands!
Bestseller No. 7
Microjig Matchfit DVC-700RAP Dovetail Rachet Clamp Ap
  • Unmatched Precision: With the innovative Anti-Pivot Spring technology, the MatchFit Ratchet Clamp AP keeps the clamp arm firmly in place, eliminating...
  • Instant Adjustability: Benefit from the quick-release trigger for immediate clamp release, allowing rapid adjustments and saving precious time during...
  • DIY Dovetail Tracks: With the MatchFit system, you can route your dovetail clamp tracks using a dovetail bit. This unparalleled freedom lets you...
  • Secure Hold: The ratchet mechanism of the MatchFit Ratchet Clamp AP resists vibrations during rigorous tasks such as sanding, routing, or grinding,...
  • Versatile Capability: With a 7-inch clamp capacity and a deep 2-1/2-inch throat depth, the MatchFit Ratchet Clamp AP broadens your project...
Bestseller No. 8
MICROJIG GRR-RIPPER GR-HB-010 Handle Bridge Kit, Accessory Only, Yellow
  • Evenly distribute downward pressure on your GRR-RIPPER. *GRR-RIPPER sold separately. Handle not included.
  • Increase stability with 4-points of surface contact
  • Adjust the handle to find the best angle that suits you,
  • Includes bonus Trailing Hook for grabbing the backend of the workpiece.
  • Designed and Made in the USA.
SaleBestseller No. 9
MICRO JIG - GRP-3Y Micro Jig Yellow Replacement Center Leg For GRR-Ripper
  • Package Dimensions: 3.3 cms (L) x 10.7 cms (W) x 25.7 cms (H)
  • Package Quantity: 1
  • Product Type: Tools
  • Country Of Origin: United States
SaleBestseller No. 10
MICROJIG GRR-RIPPER GRP-11G 1/8" Leg Table Saw Accessory, Green
  • GRR-RIPPER Accessory for ripping 1/8" thin rips consistently and cleanly on a table saw
  • Attaches directly to the main body of the GRR-RIPPER or directly to the Side Leg of the GRR-RIPPER
  • Powerful Green GRR-RIP holds and feeds wood through the cut
  • Easily cleans with denatured or rubbing alcohol
  • Perfect for edge bending, veneer, inlays, decorative design, model building and more.
SaleBestseller No. 11
MICROJIG GRR-RIPPER RR-303 3-Piece Replacement Leg Set, Yellow
  • 1/4", 1/2", and Center Replacement Legs for your GRR-RIPPER
  • Fits any and all existing GRR-RIPPER models
  • Perfect for when you accidentally cut into and trim your GRR-RIPPER legs
  • Cutting into the GRR-RIPPER is better than cutting into your hands!
Bestseller No. 12
MICROJIG GRR-RIPPER GR-200+GRP-11G Gripper Tm 200 Advanced System With 1/8 Leg, Green
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
  • Protect hands and prevent kickback like never before
Bestseller No. 13
MICROJIG GRR-RIPPER GR-200 Gripper Tm 200 Advanced System With 1/8 Leg, Green
  • Precision woodworking hand pushing tool with adjustable/detachable components
  • Utilizes multiple grooved non-slip pads for strong gripping & holding power
  • Pushes & holds both sides of the work piece as it is being cut
  • Pushes & holds the work piece as the saw blade passes through either right or left tunnel
  • The handle, center leg & balance support are all fully adjustable
SaleBestseller No. 14
MICRO JIG - GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws
  • Auto-retracting heel technology hooks the tail-end of your board
  • Proprietary Green GRR-RIP for extreme hold
  • 90-degree flip guide for vertical footing on band saws and router tables
  • Ergonomic handle exerts directional pressure against the fence
  • Optional mounts for Deflector/Connector shield plate for additional protection against chip debris
SaleBestseller No. 15
MICROJIG GRR-RIPPER GR-200 Advanced 3D Pushblock, Yellow
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
  • Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
  • Precise 1/4" thin rips
  • Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
  • Designed in the USA. A true MICROJIG Innovation
Bestseller No. 16
MICRO JIG ZP750-S1 Zeroplay Miter Stop (New, Upgraded), Green, 9.5" x 0.3125" x 0.78"
  • Accurate miter stop that locks into the T-Track for precise stop cuts and blind rabbeting
  • Works as an anchor for hold-downs and clamps along the miter slot
  • Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks
  • Country of Origin: ‎Taiwan
SaleBestseller No. 17
MICROJIG GRR-RIPPER GR-200 Advanced Adjustable Table Saw Pushblock, Yellow
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
  • Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
  • Precise 1/4" thin rips
  • Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
  • Designed in the USA. A true MICROJIG Innovation
Bestseller No. 18
MICRO JIG - GRR-RIPPER GRGH-040 Gravity Heel Kit Newest Version, Yellow
  • Auto-dropdown and adjustable to 1"
  • Hooks the tail end of your workpiece and automatically retracts mid-board.Provides extra leverage to help push through the cut and prevent blow out.
  • Includes 5 Heel Spacers, and mounting hardware
Bestseller No. 19
MICROJIG GRR-RIPPER GR-200 Advanced Adjustable Table Saw Pushblock, 2-Pack, Yellow
  • Microjig is on a mission to end table saw injures by 2020. We've made a pledge to empower the next generation of skilled craftsmen by donating...
  • The Grr-Ripper provides three directions of force giving you superior precision, control and safety.
  • Virtually eliminates kickback
  • Keeps stock firmly against the fence
  • Control and feeds both sides of the stock for cleaner cuts
SaleBestseller No. 20
GRR-RIPPER 1/2" Leg Replacement by MICROJIG. Fits any existing GRR-RIPPER
  • 1/2" Replacement Leg for your GRR-RIPPER
  • Fits any and all existing GRR-RIPPER models
  • Perfect for when you accidentally cut into and trim your GRR-RIPPER legs
  • Cutting into the GRR-RIPPER is better than cutting into your hands!

What should you look for when purchasing the best microjig gripper alternative?

To purchase the right product, you need to research its qualities and flaws.

Diversity is highly important since it offers options for different budgets and lifestyles. Choosing the best microjig gripper alternative requires asking yourself the right questions to ensure the product is precisely what you need.

To make your money’s worth, you should thoroughly research the options you are presented with and ask the following questions:

  • How does buying microjig gripper alternative benefit me?
  • Is it worth the price?
  • Which microjig gripper alternative is the best option to go for in the nowadays market?
  • What features are essential when purchasing the microjig gripper alternative?
  • Which brand of the this is most trustworthy?
  • Which microjig gripper alternative has the best price/value ratio?

You are bound to have even more vitally important questions when purchasing the microjig gripper alternative. The best way to inform yourself about it is a meticulous exploration of internet resources and research for second opinions and customer reviews.

Various websites can hold pieces of information necessary for purchasing a top-notch product. Forums, reviews, and rating websites can all offer you the instrumental info needed to buy the best possible microjig gripper alternative. In order to get accurate information, you should explore trustworthy websites that have a history of providing customers with specific and genuine content.

Curee.org worked hard and conducted comprehensive research to get you the necessary information regarding the microjig gripper alternative.

It helps us to put together a high-quality buying guide that will provide you with pros and cons, features, and reasons the product is the right choice for you. To get the microjig gripper alternative that will suit your needs best, you should consider the following factors:

Advantages of the Brand

Every brand of microjig gripper alternative holds different values to it. Typically, each and every brand will have something unique that will attract your attention and make you consider their product as the leading option. The more unique the feature is, the more it will allure you to the product and its value.

Features

Each product has some value that separates it from the pack. Therefore, always ask yourself what features are relevant when purchasing the microjig gripper alternative? What is essential for this product to have?

Value of the product

This factor is crucial since it can tell you how much value you will get for your money’s worth when purchasing this.

Customer reviews

The second opinion always matters when you cannot decide on which product you should opt for. These reviews will paint you the picture of the microjig gripper alternative by real-world customers that had experience with the product and inform you on how well it served them.

Customer ratings


Customer ratings are similar to reviews but offer you a number or star rating of the microjig gripper alternative, which can tip the scales when you are unsure which product to choose.

Reliability

To get the microjig gripper alternative that will serve your purposes and pay off, you need to choose a reliable and durable one. High-quality product equals wise investment and peace of mind.

Beware off-brands

Purchasing the off-brand microjig gripper alternative is unwise. Always look for reliable brands that offer you the highest possible quality and are trusted and recognized as a legitimate option.

Curee.org always tends to bring its visitors accurate and valuable information that is relevant to the microjig gripper alternative. We always refresh and update our content since our priority is and has always been top-notch user experience.

If you have any questions or suggestions about our presentation of the this product, please let us know. You can contact us here, and if our article has made you interested in our work, you can find more about us and better realize our vision and what it represents.

FAQ:

Q: Why choose microjig’s gripper block?

A: MicroJig’s gripper block, the GRR-RIP Block, is well received among DIYers, industry craftsman and other professionals alike. When you are working with saws and gripper blocks, safety is the top-priority and the GRR-RIP Block delivers on that priority. The GRR-RIP Block allows you to shield your hands from the blades.

Q: Can I flip the gripper block 90 degrees?

A: If you are using the gripper block on a veneer or bandsaw, you have the ability to flip the product to the left or right 90 degrees. Your satisfaction with the GRR-RIP Block is guaranteed.

Q: Why choose GRR-Rip gripper blocks?

A: A common issue for gripper blocks is the gripping power. However, the GRR-RIP Block blows away the competition with their proprietary non-slip material. With a design that has pods to compress, the block gives you the power and lasts longer than most materials.