3,431 Reviews Scanned
- 🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards,...
- 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- 🌟This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick...
- 🌟The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder...
- 🌟The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB...
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and...
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption...
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of...
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in...
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements....
- ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering...
- ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks....
- ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No...
- ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent...
- ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct...
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking...
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low...
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other...
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and...
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also...
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat...
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean...
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid...
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no...
- Warranty :If you have any questions, please feel free to contact us at any time. Thank you!
- Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat...
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean...
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid...
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no...
- Warranty :If you have any questions, please feel free to contact us at any time. Thank you!
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No...
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your...
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are...
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder...
- What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch...
- No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not...
- Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the...
- Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors...
- Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small...
- Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need...
- Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the...
- Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work; And the wicks adopt fine braid design...
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- Width : 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm.
- Feature : Anti-oxidation,anti-corrosion.
- Function : Used to remove excess solder.
- Made of high-quality materials.
- It is non-toxic, tasteless and very safe to use.
- Made in United States
- ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random.
- ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft.
- ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat...
- ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free,...
- ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency,...
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board...
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size;...
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat...
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small...
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
- [Quantity and Size] Our solder core braid is 1.5m/5ft long and 2.5mm/0.1in wide high-quality soldered core wire.It adopts flat knitting,fast heat...
- [Excellent Quality] Our degumming core wire is made of ultra-thin 100% pure copper braid.Once the solder core and solder are heated,the solder braid...
- [Easy to Use] It has excellent thermal conductivity and requires less heat.Due to the short heating time,it can well protect the sensitive pads,solder...
- [Wide Application] Our tin-absorbing core wire can be used for all types of electronic circuit boards.It can clean solder joints and pads on the...
- [Thank You for Your Support] Thank you for your support of our products.Your satisfaction is our greatest encouragement; If you have any questions...
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes
- Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
- 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm...
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid...
- 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and...
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the...
- 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and...
What should you look for when purchasing the best solder wick?

To purchase the right product, you need to research its qualities and flaws.
Diversity is highly important since it offers options for different budgets and lifestyles. Choosing the best solder wick requires asking yourself the right questions to ensure the product is precisely what you need.
To make your money’s worth, you should thoroughly research the options you are presented with and ask the following questions:- How does buying solder wick benefit me?
- Is it worth the price?
- Which solder wick is the best option to go for in the nowadays market?
- What features are essential when purchasing the solder wick?
- Which brand of the this is most trustworthy?
- Which solder wick has the best price/value ratio?
You are bound to have even more vitally important questions when purchasing the solder wick. The best way to inform yourself about it is a meticulous exploration of internet resources and research for second opinions and customer reviews.
Various websites can hold pieces of information necessary for purchasing a top-notch product. Forums, reviews, and rating websites can all offer you the instrumental info needed to buy the best possible solder wick. In order to get accurate information, you should explore trustworthy websites that have a history of providing customers with specific and genuine content.
Curee.org worked hard and conducted comprehensive research to get you the necessary information regarding the solder wick.
It helps us to put together a high-quality buying guide that will provide you with pros and cons, features, and reasons the product is the right choice for you. To get the solder wick that will suit your needs best, you should consider the following factors:
Advantages of the Brand
Every brand of solder wick holds different values to it. Typically, each and every brand will have something unique that will attract your attention and make you consider their product as the leading option. The more unique the feature is, the more it will allure you to the product and its value.Features
Each product has some value that separates it from the pack. Therefore, always ask yourself what features are relevant when purchasing the solder wick? What is essential for this product to have?Value of the product
This factor is crucial since it can tell you how much value you will get for your money’s worth when purchasing this.Customer reviews
The second opinion always matters when you cannot decide on which product you should opt for. These reviews will paint you the picture of the solder wick by real-world customers that had experience with the product and inform you on how well it served them.Customer ratings

Customer ratings are similar to reviews but offer you a number or star rating of the solder wick, which can tip the scales when you are unsure which product to choose.
Reliability
To get the solder wick that will serve your purposes and pay off, you need to choose a reliable and durable one. High-quality product equals wise investment and peace of mind.Beware off-brands
Purchasing the off-brand solder wick is unwise. Always look for reliable brands that offer you the highest possible quality and are trusted and recognized as a legitimate option.
Curee.org always tends to bring its visitors accurate and valuable information that is relevant to the solder wick. We always refresh and update our content since our priority is and has always been top-notch user experience.
If you have any questions or suggestions about our presentation of the this product, please let us know. You can contact us here, and if our article has made you interested in our work, you can find more about us and better realize our vision and what it represents.
FAQ:
Q: How and when to use solder wick?
A: Soldering wick could be used, mostly, for small repairs, removal of the excess solder in the tight joints. For instance, if I need to remove through-hole components from the circuit board, I prefer to use a solder wick or desoldering braid. How to use desoldering braid? Unwind several inches of the copper braid.
Q: What do you use for a solder wick?
A: Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux , usually supplied on a roll. The end of a length of braid is placed over the soldered connections of a component being removed.
Q: What is a solder wick used for?
A: A soldering wick can be used to remove excess solder leftover after fusing components together with a soldering iron.
Q: How do you use solder wick?
A: To use soldering wick, a person places the copper braid over the unwanted solder and heats it with a soldering iron. After the heat draws the solder into the braid, the technician or engineer removes both the braid and the heat source simultaneously.